Can't update Firmware for Printer |
您所在的位置：网站首页 › samsung xpress m2830dw wifi setup › Can't update Firmware for Printer |
|
@EOJTech wrote:No such thing as a stupid question. You need to log in as administrator on SWS, not Windows. Open your browser and enter the IP address of the printer in the address line. You may get a message from your browser but that's OK, just blow through it.Once SWS opens, locate the LOGIN tab. Assuming that the admin credentials have not been altered, enter "admin" (no quotes) for the user name and "sec00000" (again no quotes) for the password. Once logged in as administrator, locate and open the MAINTENANCE tab.If there is no LOGIN tab, look for the tab named MAINTENANCE and open it. Some lower end models (no disrespect intended) do not have an admin function.Open the FIRMWARE UPGRADE tab and follow the prompts. When asked for the file, locate the .hds file you extracted from your firmware download.Be patient and wait for everything to finish. The printer may or may not power-cycle more than once on its own. If you think it's done, wait five minutes.Good luck! EOJTech, HP and Samsung should give you some kind of award. Your detailed explanations in this thread are the ONLY reference I've been able to find that answered all the questions necessary to update the firmware on my Samsung M2070F laser printer. It worked!
Thank you and I wish others besides me (at the time I posted this) would give you a thumbs up for your help. You seem to be the kind of person who just likes helping others with no need for kudos, but I think it might help others find your solutions. I'll just emphisize what the OP (mjbarr3) reported--I had to run through the firmware update process twice before the new version took hold. After the first time, it was still on the original firmware. |
| CopyRight 2018-2019 办公设备维修网 版权所有 豫ICP备15022753号-3 |